Stratasys J4100 User Manual page 39

Stratasys J4100 User Guide
If you cannot continue printing:
1. Cancel the job.
2. Remove the partially printed model from the build tray.
3. Resend the job to the printer.
You can stop printing from either the printer interface or from GrabCAD Print.
• After clicking the Stop button in GrabCAD Print, you can resume printing
from GrabCAD Print or from the printer interface.
• After stopping printing from the printer interface, you can resume printing
only from the printer interface.
• After clicking the Pause button in the printer interface, you can resume
printing only from the printer interface.
DOC-26000 Rev. C
In GrabCAD Print, in the Schedule screen (see above):
❒ Right-click on the job to display the pop-up menu, and select Cancel job.
OR—
❒ Left-click on the job to display the Job Status details, and click the Cancel
icon .
❒ Click
.
4 Operating and Maintaining the Printer
4-14