Stratasys J4100 User Guide
To replace the roller scraper:
1. Prepare—
2. Remove the right UV lamp and the roller waste collector covering (see steps
3. Loosen the two screws securing the roller waste collector and pull it out.
4. Remove the screws that secure the roller scraper assembly.
DOC-26000 Rev. C
❒ a new roller scraper blade
❒ a Phillips 1x75 mm screwdriver
❒ a 2.5-mm and a 2-mm hex (Allen) key
4 to 8 on page 4-43).
Figure 4-54 Removing the roller waste collector
Figure 4-55 Removing the roller scraper screws
4 Operating and Maintaining the Printer
4-47