Stratasys J4100 User Manual page 101

Stratasys J4100 User Guide
4. Make sure that the build tray is empty. Confirm this in the wizard screen and
➢ When using a Stratasys UV sensor box that you connect to the printer
➢ When using a stand-alone UV radiation meter, continue with "External UV
DOC-26000 Rev. C
click Next.
Figure 4-106 Printer preparation
(TOL-03005-S), continue with "UV Sensor Connected to Printer" on the next
page.
Meter" on page 4-78.
4 Operating and Maintaining the Printer
4-76