Cleaning The Print-Head Splash Shield - Stratasys J4100 User Manual

Stratasys J4100 User Guide

Cleaning the Print-Head Splash Shield

To prevent excess printing material from accumulating around the print heads, a
splash shield is installed on the bottom of the print block. Remove the shield and
clean it once a month, when cleaning the print heads (see "Cleaning the Print
Heads, UV Lamp Glass, Roller and Wiper" on page 4-37).
To remove the print-head splash shield:
1. Run the Cleaning wizard from the Options menu.
2. Open the printer and place a mirror on the build tray.
3. Put on cleaning gloves.
Caution
Uncured printing material on the print heads might cause skin irritation. Use
disposable cleaning gloves to protect your hands.
DOC-26000 Rev. C
When the printer moves components to the cleaning position, the following
screen appears.
Figure 4-67 Wizard screen during cleaning tasks
4 Operating and Maintaining the Printer
4-54