Stratasys J4100 User Manual page 50

Stratasys J4100 User Guide
Additional Flushing Cycles
The flushing cycle you select in the Material Replacement Options screen
determines how thoroughly to flush out material currently in the system. After
selecting the Economy cycle and completing the wizard, you might decide that
you require a more thorough flushing, to ensure accurate model color. Or, you
may notice that printed models are not satisfactory because they contain traces
of the previous material. If so, you can flush out more material, so that the next
models will be printed with pure material.
To perform additional flushing cycles:
➢ In the Advanced Settings screen, select Enable "flush again" options and
The Material Replacement Options screen appears, where you can select the
material(s) you need to flush again.
DOC-26000 Rev. C
click Apply.
Figure 4-25 Enable flush again options selected
4 Operating and Maintaining the Printer
4-25