Table of Contents
Advertisement
Stratasys J4100 User Guide
9. To flush out material currently in the system, choose the flushing cycle that fits
The default flushing cycle is the one used for the last material replacement.
There are additional settings that you can select for special purposes (see
"Advanced Settings"). If necessary, click Advanced Settings before clicking
Next.
DOC-26000 Rev. C
your needs:
❒ Economy. This cycle can be used when replacing a light-colored Model
material with a darker material (such as Agilus30 Black™ or
VeroBlack™) or if the exact color of the printed models is unimportant.
Use this cycle when replacing cleaning fluid with any Model material.
The wizard flushes the system with the minimum amount of material
needed to ensure that models have the mechanical properties of the new
material.
❒ Full. Use this cycle when the printed models must have the exact color of
the new material.
The wizard thoroughly flushes the feed tubes and print heads needed for
printing, based on your selections in the previous screens.
4 Operating and Maintaining the Printer
4-18
Advertisement
Table of Contents
