Stratasys J826 User Guide
5. In the Cartridge Positioning and Process Progression screen, click Start.
6. Read the Warning message that appears, and click OK to continue.
The Advanced Settings dialog box enables you to configure the Material
Advanced
Replacement wizard for special purposes. If necessary, click Advanced
Settings
Settings in the Material Replacement Options screen before clicking Next.
Positioning By default, Automatic slot selection determines the best slot locations for the
cartridges in the material cabinet, based on materials currently in the system.
This ensures minimum flushing of materials currently loaded.
Select Manual slot selection—
• if there is a special need to load cartridges in certain slot locations.
• if you only want to change one of the cartridges for a given material
Some materials cannot replace certain other materials. If you attempt to do
so, the wizard notifies you.
DOC-28000 Rev. D
Figure 4-19 Cartridge Positioning and Process Progression screen
Figure 4-20 Warning message
Material replacement begins.
channel.
4 Operating and Maintaining the Printer
4-21