Stratasys J4100 User Manual page 29

Stratasys J4100 User Guide
2. After the printer-control computer boots, log in to Windows and launch the
printer-control program:
❒ On the printer-computer desktop, double-click the J4100 printer icon.
or—
❒ From the Windows Start menu, select (All) Programs > Objet > J4100.
A HASP plug containing a valid product activation key is required on the
printer computer. This is supplied during printer installation or upgrade. If the
application does not open and a HASP message appears, contact your
Stratasys dealer or service provider.
The printer-control computer displays the main printer interface. All monitoring
and controlling of the printer is done from this interface.
Figure 4-3 Printer interface
DOC-26000 Rev. C
4 Operating and Maintaining the Printer
4-4