Stratasys J4100 User Manual page 116

Stratasys J4100 User Guide
6. Loosen the screw securing the UV lamp cover (A), and pull the cover up (B),
7. Pull the UV reflector out of the UV housing.
8. Using a 2.5-mm hex key, remove the UV lamp clamp (2 screws).
DOC-26000 Rev. C
then out (C).
Figure 4-131 Removing the UV lamp cover
Figure 4-132 Removing the UV lamp reflector
Figure 4-133 Removing the UV lamp clamp
4 Operating and Maintaining the Printer
4-91