Table of Contents
Advertisement
Stratasys J4100 User Guide
Test Results
To save and view a report of all tests:
➢ Use the Save and View command buttons.
Command Buttons
Click the command buttons, on the right side of the screen to perform the
following operations:
Run
Click to run the selected tests.
Reset
Click to clear previously run tests. This returns the status of each test to Unknown
(?).
Save
Click to save a report that summarizes the tests run. The report is saved as an
HTML file. You can save any number of reports for the tests you run; the name of
the file saved is BITReport [date][time].htm. By default, these files are saved in
the printer installation folder, but you can save it in any other folder.
View
Click to display the latest test report that you saved. (You can view other test
reports by opening the relevant files in your Web browser. To do so, open
Windows Explorer, and double click the BITReport file.)
DOC-26000 Rev. C
4 Operating and Maintaining the Printer
4-102
Advertisement
Table of Contents
