Cleaning The Roller Waste Collector And Inspecting The Roller Scraper - Stratasys J4100 User Manual

Stratasys J4100 User Guide
18. Remove the cleaning materials from the printer and close the printer doors.
19. Select the confirmation check boxes in the wizard screen and click Next.
20. Click Done to close the wizard.

Cleaning the Roller Waste Collector and Inspecting the Roller Scraper

The roller waste collector removes waste material scraped from the roller.
Suction removes this waste to the printer's waste container.
This assembly should be cleaned weekly to prevent a blockage in the tubes
leading to the waste container, so that waste material does not overflow into the
printer.
To clean the roller waste collector:
1. Prepare—
2. From the Option menu, select Go to Head Inspection Position.
3. Put on the gloves.
DOC-26000 Rev. C
The roller stops rotating when you click Next.
The head-purge cycle begins. When this is complete, the final wizard screen
appears.
Figure 4-45 Cleaning wizard—final screen
❒ M2.5 and M2 Hex (Allen) keys
❒ disposable cleaning gloves
❒ 90% isopropanol (IPA—isopropyl alcohol) or ethanol (ethyl alcohol)
❒ cleaning cloth
❒ cotton swabs (Q-tips or similar)
❒ mirror
❒ flashlight
4 Operating and Maintaining the Printer
4-42