Stratasys J4100 User Manual page 37

Stratasys J4100 User Guide
Figure 4-8 Opening the Schedule screen
4. Locate the stopped job.
Figure 4-9 Stopped job in the Schedule screen
5. Click on the job to display the Job Status details, and click the Resume icon
6. In GrabCAD Print, make sure that the correct slice number is entered in the
DOC-26000 Rev. C
.
OR—
Right-click on the job to display the pop-up menu, and select Resume job.
dialog box.
Figure 4-10 Slice confirmation in GrabCAD Print
4 Operating and Maintaining the Printer
4-12