Stratasys J4100 User Guide
11. Using the polyurethane tube provided in the kit, push the new UV lamp bulb
12. Twist the tube by 180° (a), and continue to insert the UV lamp bulb into the
13. Use the UV lamp clamp to insert the lamp into place in the UV reflector.
DOC-26000 Rev. C
into the UV reflector. Make sure that the tip on the bulb is facing the slot.
Figure 4-136 Pushing the new UV bulb into the UV reflector
UV reflector (b).
Figure 4-137 Twisting the tube and inserting the UV lamp
4 Operating and Maintaining the Printer
4-93