Table of Contents
Advertisement
Stratasys J4100 User Guide
8. Clean the orifice plates, with a back-and-forth motion. Use the mirror to make
Once a month, remove and clean the print-head splash shield. (See step 4 on
page 4-55.)
9. Using the supplied cleaning sponge, clean the glass lens on both UV lamps .
10. Open the service window on the left side of the printer to access the wiper.
11. Using the alcohol-soaked cleaning cloth, remove any material remaining on
12. Remove any pieces of waste material collected in the purge unit. If
DOC-26000 Rev. C
sure that you have removed all of the residue material.
Figure 4-42 Cleaning the heads
the wiper and the surrounding area.
necessary, remove the waste collector to clean it. Wipe the rubber seal.
Figure 4-43 Removing the purge unit waste collector
4 Operating and Maintaining the Printer
4-40
Advertisement
Table of Contents
