Stratasys J4100 User Manual page 91

Stratasys J4100 User Guide
5. In the following screen, select Continue with Head optimization if you
6. In the following screen, select Replace faulty heads, and click Next.
Preparing the Print Block
7. Select the print head(s) needing replacement, and click Next.
DOC-26000 Rev. C
have recently cleaned the print heads. Otherwise, cancel the wizard and run
the Cleaning wizard.
Figure 4-85 Clean print heads screen
Figure 4-86 Procedure selection screen
Figure 4-87 Head selection screen
4 Operating and Maintaining the Printer
4-66