Stratasys J4100 User Manual page 117

Stratasys J4100 User Guide
9. Remove the UV lamp bulb from the UV reflector.
10. Before continuing, inspect the spring-loaded pins. If there are burn marks
DOC-26000 Rev. C
Figure 4-134 Removing the UV lamp bulb
around the pins or if the pins are loose—their springs are not functioning
properly—and do not support the bulb, continue with step
UV reflector.
Otherwise, continue with step 8 to replace the UV bulb.
Figure 4-135 Spring-loaded pin
4 Operating and Maintaining the Printer
, to replace the
15
4-92