Display Unit Setting Methods - YOKOGAWA AXF Series User Manual

(3) Display items
Displayed items and reversed-character
indication
Instantaneous flow rate: %
Actual instantaneous flow rate
Instantaneous flow rate: mA
Bar graph indicating instantaneous flow rate
Totalized forward-direction flow rate
Totalized reverse-direction flow rate
Totalized differential flow rate
Tag number
Diagnosis of electrode adhesion
Communication type
5.3

Display Unit Setting Methods

NOTE
This manual shows the confirmation of the set value.
In the case of changing setting, refer to "Parameter
Description" of user's manual as listed in Table 1.1.
(2 seconds or more)
Display Mode Entry Mode
Select "No"
+
FR Displays the instantaneous flow rate for the span as a percentage.
FR Displays the actual reading for instantaneous flow rate.
FR Displays the instantaneous flow rate for the span as a current output value.
Displays the instantaneous flow rate for the span as a percentage using bar
None
graph.
FTL Displays the totalized value for flow rate in the forward direction.
RTL Displays the totalized value for flow rate in the reverse direction.
Displays the differential totalized value for flow rate between forward
DTL
totalization and reverse totalization.
TAG Display the tag number (using up to 16 characters).
Displays the adhesion condition in the form of a bar graph. (See the
ADH description for parameters K10 through K15 from Chapter 8: Parameter
Description for more details.)
COM Displays the communication type.
(4) Reversed character display
Parameter Search Mode
Select "Yes"
Major Item Parameter
Search Mode
+
* The term "mode" is used to refer to a situation
where display and setting are possible.
Press the SET switch while holding down the SHIFT switch.
<5. Basic Operating Procedures>
Content
Parameter
Sub-item Parameter
Search Mode Replacement Mode
+
Setting modes
53
○: Display, ×: Not display
Disp Select2
Disp Select1
Disp Select3
○ ○
○ ○
○ ○
× ○
○ ○
○ ○
○ ○
× ○
× ○
× ○
F0502.ai
IM 01E20A01-01EN
5