Setting The Unit On Scaled Channels - YOKOGAWA Vigilant Plant MR20000 User Manual

5.3

Setting the Unit on Scaled Channels

Procedure
Explanation
5-12
Units are set on channels whose input range is set to Scaling, 1-5V, or SQRT.
1. Hold down the
2. Press the key or SHIFT +
key.
3. Set each item and press the
Use the key or SHIFT +
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up
to then are cancelled, and the display returns to a higher level menu.
4. When the Setting complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the ESC key.
5. Hold down the
Set=Unit
CH=01-01
Last channel
First channel
Unit=
01-01 Channel
Setting complete
ESC/?
Characters That Can Be Used for Units
A unit is set using up to six characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,
key for 3 seconds to enter Setting mode.
MENU
key to select Unit and then press the
key.
key to select values.
key for 3 seconds to return to Operation mode.
MENU
Set the channel range.
Set the unit.
The new setting takes effect.
2 3
, , .), and space
IM 04P02B01-01E