Output Subsystem - Racal Instruments 2461 User Manual

OUTPut Subsystem

COMMAND
OUTPut
:TTLTrg<n>
Programming The Type C Function Card 4-50
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The OUTPut subsystem is used to control the generation of a
pulse on a selected VXI backplane TTLTrg line.
OUTPut command summary
[:STATe]
Enable or disable the selected trigger line.
OUTPut:TTLTrg<n>[:STATe]<ON | OFF>
Description:
Connects (ON) or disconnects (OFF) the selected TTLTrg line
to the gate output signal.
At any time, only one TTLTrg line can be active. The command
generates the error –221 ("Setting conflict") if a line is selected
while another one is already active.
If the TTLTrg line specified is already being used for the start or
stop arming by one of the 2461 TYPE C boards in the system
(refer to the TRIGger subsystem), then the error –221 is
generated ("Setting conflict").
Initialization:
*RST
Example:
"OUTPut:TTLTrg1:STATe ON"
Enables the TTL trigger line number 1.
Interrogative form:
OUTPut:TTLTrg<n>[:STATe]? ==> <ON | OFF>
Returns the state of the selected TTLTrg line.
2461Type C User Manual
DESCRIPTION
OFF
Racal Instruments  1998