2461Type C User Manual
Arm Source
Configuration
Racal Instruments 1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The Start Arm Source and Stop Arm Source controls have the
following entries:
"
Internal"
"External, Positive Slope"
"External, Negative Slope"
Figure 5-2, Configure Arming secondary panel
The "External Arm Input" control specifies the source of the
external arming and has the following entries:
"
TTLTRG0"
"TTLTRG1"
"TTLTRG2"
"TTLTRG3"
"TTLTRG4"
"TTLTRG5"
"TTLTRG6"
"TTLTRG7"
"Front Panel"
The Gate Output Destination control has the following entries:
"
TTLTRG0"
"TTLTRG1"
"TTLTRG2"
"TTLTRG3"
Using The VXI plug&play Install Disks 5-5