2461Type C User Manual
Once the front panel is removed, insert the Function Card
(Universal Counter Timer) into the 2460 taking care to mate this
connector on the function card with that inside the 2460. Note if
only one function card is to be installed, it must be placed in
position/slot 1(see Figure 2-2). Secure it by screwing it down.
There are four screws to install.
Figure 2-4, The 2461 Type C
4 Screws
Figure 2-5, Tightening the Four Screws.
Racal Instruments 1998
Installation Instructions 2-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com