Chapter 2; Installation Instructions; Unpacking And Inspection; Reshipment Instructions - Racal Instruments 2461 User Manual

2461Type C User Manual
Unpacking and
Inspection
Reshipment
Instructions
Racal Instruments  1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

INSTALLATION INSTRUCTIONS

1. Before unpacking the switching module, check the exterior of
the shipping carton for any signs of damage. All irregularities
should be noted on the shipping bill.
2. Remove the instrument from its carton, preserving the factory
packaging as much as possible.
3. Inspect the module for any defect or damage. Immediately
notify the carrier if any damage is apparent.
4. Have a qualified person check the instrument for safety before
use.
Proper ESD handling procedures must always be
used when packing, unpacking, or installing any
function card. Failure to do so may cause damage to
the unit.
1. Use the original packing material when returning the function
card to Racal Instruments for calibration or servicing. The
original shipping carton and the instrument's plastic foam will
provide the necessary support for safe reshipment.
2. If the original packing material is unavailable, wrap the module
in plastic sheeting and use plastic spray foam to surround and
protect the instrument.
3. Reship in either the original or a new shipping carton.

Chapter 2

NOTE:
Installation Instructions 2-1