Configure Math Function; Figure 5-5, Configure Math Function Secondary Panel - Racal Instruments 2461 User Manual

2461Type C User Manual
Configure Math
Function

Figure 5-5, Configure Math Function secondary panel

Racal Instruments  1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The Enable control enables or disables the math processing.
The Offset and Scale parameters can either be the last
measurement or a numerical value to be specified in the input
box. Note that the last measurement cannot be used as offset
and scale parameter at the same time.
The Apply command button invokes the changes to the
settings. The Default command button initializes the settings to
the power-up state. The Cancel button closes the soft front
panel ignoring any change made to the settings.
Using The VXI plug&play Install Disks 5-9