Configure Inputs; Figure 5-3, Configure Input Secondary Panel - Racal Instruments 2461 User Manual

Configure Inputs

Using The VXI plug&play Install Disks 5-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
"TTLTRG4"
"TTLTRG5"
"TTLTRG6"
"TTLTRG7"
"Off"
For each 2461 Type C function card, the following parameters
can be set:

Figure 5-3, Configure Input secondary panel

•
The Coupling control sets the input coupling (AC or DC).
•
The Impedance control sets the terminating impedance
(50Ω or 1MΩ).
•
The Attenuation control sets the input block signal
attenuator (x1 or x10).
•
The Filter control enables or disables the input low-pass
filter.
•
The Trigger Mode control selects either Auto Trigger or
Manual Trigger.
•
The Slope control sets the trigger slope, which can be either
positive or negative.
•
The Hysteresis control selects the input hysteresis voltage
(high or low).
2461Type C User Manual
Racal Instruments  1998