Racal Instruments 2461 User Manual page 115

Programming The Type C Function Card 4-72
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Initialization:
N/A
Example:
"ABORt"
Stops immediately the instrument activity in
progress and places the instrument in the Idle
state.
**********************************************************
ARMing([:SEQuence1] | :STARt)[:LAYer]:SLOPe
<POSitive| NEGative | DEFault>
Description:
Selects the slope of the start arming signal. If the currently
selected source for the start arming is IMMediate, then this
command has no immediate effect.
If the device is not in the Idle state, this command has no effect
on the trigger system and an error –221 is generated ("Setting
conflict").
Initialization:
*RST
Example:
"ARMing:STARt:SLOPe POS"
Selects a positive slope for the start arming.
Interrogative form:
ARMing:([SEQuence1] | STARt)[:LAYer]:SLOPe?
==> <POSitive | NEGative>
Returns the slope of the start arming signal.
*************************************************************
ARMing([:SEQuence1] | :STARt)[:LAYer]:SOURce
<CTR_EXTARM | TTLTrg<0..7> |IMMediate >
2461Type C User Manual
POS
Racal Instruments  1998