Racal Instruments 2461 User Manual page 68

2461Type C User Manual
COMMAND
FETCh
[:VOLTage]?
[:MINimum]?
[:MAXimum]?
[:MIDDle]?
[:FREQuency]?
[:FREQuency:RATio]?
[:FALL:TIME]?
[:FTIMe]?
[:RISE:TIME]?
[:RTIMe]?
[:PERiod]?
[:PWIDth]?
[:NWIDth]?
[:TINTerval]?
[:TOTalize]?
[:PHASe]?
[:CHECk]?
Racal Instruments  1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Retrieves the following measurements:
Trigger level voltage
Minimum trigger level voltage
Maximum trigger level voltage
Middle trigger level voltage
Frequency
Ratio of frequencies
Fall time
Alias for fall time
Rise time
Alias for rise time
Period
Positive pulse width
Negative pulse width
Time interval
Totalize
Phase difference
Functional tests
FETCh? [<count>[,<start>[,<step>]]]
Description:
Returns the result of the previous measurement.
Parameters:
The default value of <count> is the number of measurements for
the Array. The default value of <start> is 1. The default value
for <step> is 1. The number of values returned is <count>. The
first of the values returned is value <start>, and then all <step>
values after start are returned.
The reading placed on the VXI output buffer is in exponential
form. For example, a 5 Mhz reading will be returned as follows:
+00005.0000000E+06. The number of returned bytes in the
VXI output buffer is fixed at 18 bytes.
Initialization: Not Applicable
Programming The Type C Function Card 4-25
DESCRIPTION