Racal Instruments 2461 User Manual page 78

2461Type C User Manual
Racal Instruments  1998
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
command (only for SCALar-type measurements).
The ARRay command programs the counter for multiple
totalize measurements as specified by the <array size>
parameter.
The optional <expected value> and <resolution> parameters
are accepted but ignored. The resolution is determined by
the input signal.
INITIALIZATION:
*RST Resolution = 8
EXAMPLE:
"MEASure1:TOTalize? "
Instructs the 2461 TYPE C to totalize events occurring at
channel 1 input during the time window defined by signal on
channel 2.
*******************************************************
MEASure[1 | 2][:SCALar]:PHASe? [<expected value>,
<resolution>]
MEASure[1 | 2]:ARRay:PHASe? <array size> [,<expected value>,
<resolution>]
DESCRIPTION:
These commands set the 2461 TYPE C to measure the
phase difference between the waveform applied to the
channel 1 input and that applied to the channel 2 input
(Phase 1 relative to 2), or between the waveform applied to
the channel 2 input and that applied to the channel 1 input
(Phase 2 relative to 1).
The ARRay command programs the counter for multiple
measurements as specified by the <array size> parameter.
The optional <expected value> and <resolution> parameters
are accepted but ignored. Their units are in degrees. The
resolution is determined by the input signal.
INITIALIZATION:
*RST Resolution = 8
Programming The Type C Function Card 4-35
Array size = 1
Array size = 1