Installation; Figure 2-1, The Universal Counter Timer - Racal Instruments 2461 User Manual

2461Type C User Manual
If The Function Card is ordered on its own, it must be installed in a

Installation

2460 Series VXIbus module before it can be used.

Figure 2-1, The Universal Counter Timer

To do this, remove the 2460 VXIbus module from the
chassis/mainframe and then remove the right side cover from the
module. Remove the four screws near the front, one screw in the
center about 4 inches from the rear, and one screw in the center
rear of the cover, between the connectors. Additionally, there are
eight screws (four on either side) on the sides of the cover. This
will give access to the inside of the module.
Racal Instruments  1998
Installation Instructions 2-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com