Test Subsystem - Racal Instruments 2461 User Manual

TEST SUBSYSTEM

TEST[1 | 2]
:RELay
:TEC
Programming The Type C Function Card 4-62
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
TEST command summary
COMMAND
:SHORt
[:STATe]
:LONG
[:STATe]
:DAC
[:STATe]
TEST[1 | 2]:RELay <OFF | ON>
Description:
This command checks the operation of the input relay for the
specified channel. Note that this test can only be performed
when the CHECk function is selected.
Use of this command requires an external connection between
channel 1 or 2 and the standard output socket on the front panel
using a 50Ω coax cable.
The test returns one of the following results:
0:
51:
52:
53:
54:
55:
56:
57:
58:
59:
DESCRIPTION
Test 2461 TYPE C relays.
Test short period TEC.
Test long period TEC.
Test ramp trigger DACs
Test Passed
Test Failed:Channel 1 Attenuator relay
Test Failed:Channel 1 Impedance relay
Test Failed:Channel 1 AC/DC relay
Test Failed:Channel 1 Filter relay
Test Failed:Common relay
Test Failed:Channel 2 Attenuator relay
Test Failed:Channel 2 Impedance relay
Test Failed:Channel 2 AC/DC relay
Test Failed:Channel 2 Filter relay
Racal Instruments  1998
2461Type C User Manual