2461Type C User Manual
The Frequency Standard control sets the standard reference.
Select Reference
This can be derived from the VXI backplane (Clock10), or be
either an optional Internal Standard or an External reference.
Note that if no internal standard is installed this will not be
offered as a choice.
The Apply command button invokes the change to the
frequency standard setting. The Cancel button closes the panel
leaving the frequency standard setting unchanged.
Figure 5-4, Select Reference
Racal Instruments 1998
Using The VXI plug&play Install Disks 5-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com