Removing A Drive Sled - IBM System Storage TS3310 Setup And Operator Manual

|
|
|
|
Figure 4-4. Power Supply
|
|
|
|
|
|

Removing a Drive Sled

|
|
4-6
TS3310 Tape Library Setup and Operator Guide
1
4
3
For each installed power supply:
1. Loosen the two thumb screws ( 2 in Figure 4-4) on the power supply by
turning them counterclockwise.
2. To remove the power supply, grasp the handle ( 1 in Figure 4-4) and slowly
pull it toward you, while supporting it from underneath.
2