Main Power Switch; Rack Safety - IBM System Storage TS3310 Setup And Operator Manual

Main Power Switch

To turn ON the power to the library, press | on each power switch installed in the
library. To turn OFF the power, press 0 on the switch. In case of danger to
personnel or property, immediately turn OFF the main power switch.
Attention: Except in emergencies, stop the library with the normal shutdown
procedure before you switch OFF the main power switch. IBM is not responsible
for damage caused by improper use of the main power switch. Such risk lies
entirely with the user.

Rack Safety

The following general safety information should be used for all rack mounted
devices.
CAUTION:
Movements of mechanical components in the library can cause
serious injury. Access to the library should be restricted to
authorized personnel only.
CAUTION:
To completely remove all power, disconnect the line cord from
the electrical outlet.
CAUTION:
Movements of mechanical components in the tape library can
cause serious injury. Before turning the main power switch ON
and restarting the tape library, confirm that no danger exists to
personnel or property.
Safety and Environmental Notices
xvii