5. Remove the yellow ribbon-like packing pieces ( 1 in Figure 3-2) from around
Figure 3-2. Yellow ribbon-like packing pieces
6. Refer to Figure 3-3 on page 3-5 and ensure that you have removed all of the
3-4
TS3310 Tape Library Setup and Operator Guide
c. Remove the plastic tie pieces. The tie should be threaded under a raised
metal loop on each side of the library floor. It may be necessary to cut the
tie in more than one place to remove it from the metal loops.
**FOR RELEASE 3: Does this come with plastic ties or velcro straps?**
the I/O Station magazines.
packaging material.
1