Web User Interface (Ui); Logging In To The Web User Interface - IBM System Storage TS3310 Setup And Operator Manual

Setup
Setup Wizard
Create Logical Library
Delete Logical Library
Create Users
Modify Users
Cleaning Slots
I/O Station Slots
Drive IDs
Licenses
Network Config
Date & Time
Network Mgmt
Control Path
LDAP
Figure 6-7. 3576 Tape Library menu tree

Web User Interface (UI)

|

Logging in to the Web User Interface

|
|
|
Operations
Move Media
Insert Media
Remove Media
Insert Cleaning Media
Remove Cleaning Media
Logical Library Mode
Load Drive
Unload Drive
Change Drive Mode
Lock I/O Station
Shutdown
The Web UI is accessible from a web browser and is best viewed using Internet
Explorer 6.0 or higher.
To manage the library using the Web UI, you must set up the initial network
configuration of the library from the Operator Panel touchscreen. For more
information, see "Modifying Network Settings" on page 5-1 and "Step 4: Set up
the Library Network Configuration" on page 7-3.
Initial login information is as follows:
v User: admin
v Password: secure
For more information on user privileges, see "User Privileges" on page 6-9.
Note:
When LDAP is enabled, the login screen gives the user a choice between using
local authentication (the login and password are stored on the library) or LDAP
Tools
Operator Interventions
Drive Mgmt
Drive Info
About Library
Service
Internal Network
System Settings
Security
Display Settings
DNS
Chapter 6. User Interfaces
6-7