Chapter 8. Operating Procedures - IBM System Storage TS3310 Setup And Operator Manual

Chapter 8. Operating Procedures

Library / Logical
Libraries
Firmware Upgrades
Drives
Cartridges
© Copyright IBM Corp. 2005, 2006
"Viewing System Information" on page 8-2
"Accessing the Setup Wizard" on page 8-2
"Creating Logical Libraries" on page 8-3
"Deleting/Modifying a Logical Library" on page 8-3
"Assigning Cleaning Slots" on page 8-4
"Assigning I/O Station Slots" on page 8-4
"Entering License Keys" on page 8-4
"Creating Users Accounts" on page 8-4
"Viewing and Setting LDAP Parameters" on page 8-5
"Setting the Date and Time" on page 8-6
"Setting Up Email Notifications" on page 8-6
"Managing the Network (SSL, Trap Registration, and SNMP Version)" on page 8-7
"Resetting the Library Control Blade IP Address" on page 8-7
"Configuring the Library for Remote Access" on page 8-9
"Managing the Network (SSL, Trap Registration, and SNMP Version)" on page 8-7
"Taking a Logical Library Offline/Online" on page 8-9
"Shutting Down/Restarting the Library" on page 8-9
"Viewing Error Messages" on page 8-11
"Capturing a Library Snapshot" on page 8-11
"Viewing Library Information" on page 8-11
"Locking/Unlocking the I/O Station" on page 8-12
"Updating Library Firmware" on page 8-12
"Updating Drive Firmware" on page 8-13
"Using the ITDT SCSI Firmware Update, Dump Retrieval and Drive Test Tool" on page
8-13
"Viewing Drive Information" on page 8-15
"Loading a Drive" on page 8-15
"Unloading a Drive" on page 8-15
"Taking a Drive Offline/Online" on page 8-16
"Adding a Control Path Drive to a Logical Library" on page 8-16
"Assigning Drive IDs" on page 8-16
"Modifying a Fibre Channel Drive Port Setting" on page 8-16
"Inserting Data Cartridges" on page 8-17
"Removing a Data Cartridge" on page 8-17
"Moving Data Cartridges" on page 8-18
"Inserting a Cleaning Cartridge" on page 8-18
"Removing a Cleaning Cartridge" on page 8-18
8-1