Installing The Rack Ears - IBM System Storage TS3310 Setup And Operator Manual

Figure 3-25. Rear thumb screws
|

Installing the Rack Ears

|
|
13. IMPORTANT: Lower the gear racks into the down (operating) position. See
1 in Figure 3-19 on page 3-21.
14. Repeat this procedure for each module in your library.
15. Store the installation lifting sling in a secure location for possible future use.
Install rack ears on the front of each module of a library to secure the module on
the rack shelves.
1. Install the right rack ear ( 2 in Figure 3-26 on page 3-28).
1
Chapter 3. Installing A New Library in a Rack
3-27