Mitsubishi Electric 800 Series Instruction Manual (Function page 175

• Output signal operation during positioning with home position return
Point table selection signal, JOG
NOTE
• When the LX signal is turned OFF, the home position return completed (ZP) signal is turned OFF. If "9999" is not set in Pr.538
Current position retention selection, the ZP signal remains ON even when the LX signal is turned OFF. (For details on the
current position retention function, refer to
174
7. Position Control
7.3 Simple positioning function by point tables
LX
ON
STF
X76
Pr.1283 Home position return speed
Speed
0
Slope set by Pr.7
Slope set by Pr.8
ZP
ON
Y36
ON
MEND
PBSY ON
page 182.)
ON
ON
Pr.511 Home position return shifting speed
Home position
Slope set by Pr.1223
Slope set by Pr.1222
ON
ON
ON
Time