Mitsubishi Electric 800 Series Instruction Manual (Function page 26

2.1.2 Basic operation of the operation panel
 Basic operation (standard model)
Operation mode switchover/Frequency setting
External operation mode (displayed at power-ON)
*1
First screen (Output frequency
*2
Parameter clear
*1 For the details of operation modes, refer to
*2 The monitor item can be changed. (Refer to
*3 Not displayed for the 575 V class.
*4 For the details of the fault history, refer to the Instruction Manual (Maintenance).
PU operation mode
Blinking
Change the setting.
Second screen
monitoring)
(Output current
PU operation mode
The present setting is
displayed.
All parameter clear
Group parameter setting
(Example)
Blinking
Fault record 1
The last ten fault records can be displayed.
When the fault history is empty, only the fault number is displayed.
page 250.
page 310.)
*1
Frequency setting written and complete
monitoring)
*2
Change the setting.
Fault history clear
Automatic parameter setting
(Example)
Blinking
Fault record 2
*4
PU Jog operation mode
*1
Third screen
(Output voltage monitoring)
*2
Blinking
Parameter write complete
Initial value change list
PM initialization
*3
(Example)
Blinking
Fault record 10
*4 *4
2. Basic Operation
2.1 Operation panel
1
2
3
4
5
6
7
8
9
10
25