Mitsubishi Electric 800 Series Instruction Manual (Function page 85

*4 Differs depending on the capacity.
6%: FR-E820-0015(0.2K) or lower and FR-E820S-0015(0.2K) or lower
4%: FR-E820-0030(0.4K) to FR-E820-0330(7.5K), FR-E840-0016(0.4K) to FR-E840-0170(7.5K), and FR-E820S-0030(0.4K) or higher
2%: FR-E820-0470(11K) or higher and FR-E840-0230(11K) or higher
1%: FR-E860-0017(0.75K) or higher
*5 The set value is read/written in 2-word (32-bit) units when the PLC function is used for parameter reading/writing.
*6 The setting is available only when a Vector control compatible option is installed.
*7 On the LCD operation panel used as the command source, the parameter number in parentheses appears instead of that starting with the letter C.
*8 For the Ethernet model and the safety communication model, the setting is available only when the FR-A8AY is installed.
*9 For details, refer to the Instruction Manual (Communication).
*10 Available when the PLC function is enabled. (Pr.313 to Pr.315 are always available for settings in the Ethernet model and the safety
communication model.)
*11 For the standard model, the setting is available only when a communication option is installed.
*12 For details, refer to the FR-E800-SCE Instruction Manual (Functional Safety).
84
3. Parameters
3.2 Parameter list (by parameter number)