Mitsubishi Electric 800 Series Instruction Manual (Function page 494

• The overcurrent prevention function is disabled when Pr.662 = "0".
NOTE
• When the level set in Pr.662 is more than the stall prevention operation level, the overcurrent preventive function is activated
at the level set in Pr.22 (Pr.48), Pr.23, or Pr.66. (When Pr.22 (Pr.48) = "0" or the stall prevention operation is disabled by
Pr.156 setting, the overcurrent preventive function is activated at the level set in Pr.662.)
Parameters referred to
Pr.22 Stall prevention operation levelpage 295
Pr.60 Energy saving control selectionpage 474
Pr.162 Automatic restart after instantaneous power failure
Pr.270 Stop-on-contact control selectionpage 415
Pr.261 Power failure stop selectionpage 455
selectionpage 443, page 449
17. (G) Control Parameters
17.10 Increased magnetic excitation deceleration
11
12
13
14
15
16
17
18
19
20
493