Table of Contents
Advertisement
Setting a Wait Time for Connecting to a Network
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Select <Menu> in the Home screen.
2
Select <Network Settings>.
●
If the screen for entering a PIN appears, enter the correct PIN.
3
Select <Waiting Time for Connection at Startup>.
4
Enter the waiting time required to start a communication with the network, and
press
.
LINKS
Configuring Ethernet Settings(P. 58)
Changing the Maximum Transmission Unit(P. 60)
Setting Up
Home Screen(P. 88)
Setting the System Manager PIN(P. 145)
61
23FJ-067
Advertisement
Table of Contents
