Calling telegram configuration via project navigator
1. In the network view, select the IO device (S210 drive) and then click the PROFINET
interface.
2. In the Inspector window, select "Properties > Telegram configuration".
The telegram configuration settings are displayed.
6.2.6.3
Settings for SINAMICS S120
Telegram configuration for S120 drives
The dialog box for the telegram configuration is structured as follows:
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Commissioning NC-controlled drives
6.2 Commissioning drives with "Startdrive"
121