Table of Contents
Advertisement
3. Click on "Windows Defender Firewall".
4. Click on "Advanced settings" and confirm the call of the expanded settings with "Yes" if
necessary.
5. In the "Windows Defender Firewall with Advanced Security" dialog, click on "Inbound Rules".
6. Select the corresponding rule for the relevant network profile:
– File and Printer Sharing (Echo Request - ICMPv4-In) - Profile "Domain"
– File and Printer Sharing (Echo Request - ICMPv4-In) - Profile "Public"
– File and Printer Sharing (Echo Request - ICMPv4-In) - Profile "Private"
In the factory setting state, the network profile "Public" is assigned to the company network.
Figure 10-6
Rules for incoming ICMP pings, separate for each network profile
7. Right-click on the selected rule, then click "Enable Rule".
By prompt, script or batch file
Basic procedure
With a command according to the following scheme, you can permit ICMP pings which arrive
at the company network interface (X1) of the Siemens PC system. Outgoing pings from the
Siemens PC system are already activated.
Note
Dependency for the file and printer release
If you activated the file and printer release in the company network, incoming ping requests are
already permitted because they are required for the file and printer release.
The name of the relevant firewall rule is "File and Printer Sharing (Echo Request - ICMPv4-In)".
To do this, call the prompt as the administrator and enter the command either completely or
successively.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Installing and setting up PCU Base for IPC
10.3 Configuration of the system
221
Advertisement
Table of Contents
