Table of Contents
Advertisement
10.5.8
Restore a disk image of a partition
If your system is no longer functioning stably, you can restore it with a disk image.
Note
Restoring replaces all current files
When you restore a partition from a disk image, all programs, settings, and files are completely
replaced on this partition by the disk image. You cannot restore individual files or exclude
individual files from restoration.
Precondition
A disk image of a partition exists
Further information: Starting the Service Center (Page 245)
Procedure
To restore a partition from a disk image, proceed as follows:
1. Start the Service Center, e.g. from the Windows boot menu.
Further information: Create a disk image of a partition (Page 255)
2. In the main menu of the Service Center, click "Partition Restore".
The "Partition Restore" dialog box opens.
Figure 10-14
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Service Center - Partition Restore
Installing and setting up PCU Base for IPC
10.5 Backing up and restoring data
257
Advertisement
Table of Contents
