Position Of The Interfaces - Siemens SINUMERIK MC Commissioning Manual

3.3

Position of the interfaces

Interfaces on the MCU
The MCU has the following interfaces:
X1 P1
X2 P1
X3 P1
X30
X31
X50
X60, X61, X62, X63
X70, X71
X80
X125, X135
X127 P1
X130 P1
X140
X142, X152
X155
X150 P1 R
X150 P2 R
X160 P1
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Industrial Ethernet
COM1
COM2
USB
DisplayPort
+24 V DC
USB
Industrial Ethernet
DisplayPort
PROFINET IO
Requirements for commissioning
3.3 Position of the interfaces
Ethernet interfaces (e.g. for system and company
network)
X3 (optional)
Serial interfaces (optional)
Slot for the CFast card with cover
Connections for peripheral devices (e.g. for key‐
board, mouse, or external drives)
Connections for digital monitors (e.g. for a SIMAT‐
IC operator panel)
external power supply
only for commissioning and servicing
MCU service interface
for connection to a company network
for service purposes only
Digital inputs/outputs, NC
Slot for the SD card with cover
IRT PROFINET components (e.g. for SINAMICS
drive components S120 and S210)
PROFINET connection (e.g. for a system network
with SIMATIC ET200 SP)
27