10.5.7
Create a disk image of a partition
You can create a disk image of an individual partition of the SSD in the Service Center with the
"Partition Backup" function.
Procedure
To save a partition of the SSD as a disk image, proceed as follows:
1. Start the Service Center, e.g. from the Windows boot menu.
Further information: Starting the Service Center (Page 245)
2. In the main menu of the Service Center, click "Partition Backup".
The "Service Center - Partition Backup" dialog box opens.
Figure 10-13
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Service Center - Partition Backup
Installing and setting up PCU Base for IPC
10.5 Backing up and restoring data
255