Table of Contents
Advertisement
Installing and setting up PCU Base for IPC
10.2 First commissioning of SIMATIC IPCs
● There is an English Windows installation on the PC system.
● The partition C: of the PC system has a minimum size of 30 GB.
● The installation medium is available on the PC system.
Procedure
To install PCU Base for IPC on your PC system, proceed as follows:
1. Open Windows Explorer and switch to the installation medium of PCU Base.
2. Double-click the file "setup.exe".
3. Restart the PC system after you have installed PCU Base.
Result
PCU Base for IPC has been installed. During the installation, the previously existing settings on
the SIEMENS PC system, e.g. user accounts, keyboard layout, date and time settings, were
imported. Set up additional user accounts (Page 183) if necessary and set the keyboard
layout to English (Page 186).
The PCU Installer is initially inactive after the installation. It must be activated (Page 233) before
software can be automatically installed.
182
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
Advertisement
Table of Contents
