Installing and setting up PCU Base for IPC
10.5 Backing up and restoring data
10.5.12.2
Connection options in the system network
Overview
The following figures show the typical connection options in the system network:
● Service PG/PC with (twisted) Ethernet cable direct to interface "X2" of the Siemens PC
system.
● Service PG/PC with (non-twisted) Ethernet cable via switch to interface "X2" of the Siemens
PC system.
Configuration using the PG/PC directly at the Siemens PC system
Figure 10-16
Configuration with PG/PC and switch at the Siemens PC system
262
Connecting a PG/PC directly at the IPC
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB