4. Check or configure the following settings:
– The DHCP server function is deactivated.
– The standard IP address 192.168.214.241 has been entered.
5. Click "Apply".
6. Select "File > Exit" in the menu to close the window.
Result
The NC/PLC and IPC components of the SINUMERIK MCU have now been configured and
connected for internal network communication.
MCU commissioning: NC, PLC, Drive
Commissioning Manual, 02/2020, A5E47437618B AB
3.5 Check the NC and IPC connection of the MCU and configure
Requirements for commissioning
33