2.3
CT Setting
Setting method
Configure the settings in "CT setting" of the engineering tool.
1.
Start parameters.
[Navigation window] [Parameter] [Module Information] Target module [CT setting]
2.
Double-click the item to change the setting, and enter a setting value.
• Items where a value is selected from a drop-down list
Clicking the [] button of the item to be set displays the drop-down list. Select the item.
• Items where a value is entered into a text box
Double-click the item to be set, and enter a value.
2 PARAMETER SETTING
137
2.3 CT Setting
2